- Enhanced Retention for Polar Basic Compounds
- 100% Aqueous Stability
- Available in 2.6 µm for UHPLC and HPLC
By making the switch from fully porous to core-shell particles, labs gain instant access to increased productivity, improved chromatographic results, easy method transferability, and significant cost savings.
But don’t take our word for it! Check out our application notes of how Kinetex PS C18 performed compared to a conventional fully porous UHPLC columns and achieves your desired LC selectivity. Click the link or image below to keep reading: CLICK HERE
“Our scientists wanted to investigate the Kinetex 2.6µm PS C18 HPLC/UHPLC column’s improved chromatographic performance and unique multi interaction selectivity when applied to a screen of 36 tricyclic antidepressants. Both columns tested were of the same dimension (100 x 2.1mm) and ran under identical conditions, on the same UHPLC system, and during the same period of time. The gradient consisted of Water with 0.1% Formic acid as the weak solvent and Acetonitrile with 0.1% Formic acid as the strong organic solvent. A flow rate of 0.5mL/min was used, and the column heater was set to an ambient temperature of 25°C. An Agilent® 1200 HPLC system was used for the investigation with a SCIEX™ API 4000™ mass spectrometer (MS) for detection. The Kinetex PS C18 is a USP classified L1 column, that provides both a unique polar and non-polar selectivity as well as 100% aqueous stability.”
Have questions or looking for assist for your next method development? Reach out to our Technical Experts 24/7 with Live Chat! Click the link to start chatting today: CLICK HERE
Like this article? You’ll probably love these then!